KTSF26台增加了一個全新訊號﹐於26.11頻道廣播。請立即掃瞄你的電視頻道﹐尋找這個全新訊號
KTSF26台的節目現在於三個電視頻道中廣播﹐訊號分別來自灣區三個發射塔。26.1的訊號來自南灣的Mt. Allison。26.2的訊號來自北灣的Mt. Tamalpais。全新頻道26.11的訊號來自三藩市Twin Peak 的Sutro發射塔。三個發射塔﹐覆蓋整個灣區。立即掃瞄你的電視頻道﹐尋找最佳訊號。26.1、26.2、或26.11﹐總有一個適合您。
如何掃描電視﹖
-
- 確保您的電視已連接至天線。
- 按遙控器上的 “Menu” 按鈕。 (某些遙控器是 “Setup” 按鈕,而不是 “Menu” )
- 在電視menu中尋找並選擇 “Channel Scan” 選項。在某些遙控﹐此選項標記為“Rescan”,“Find Channel”,“Auto Program”, “Tune” 或 “Auto Tuning”。
- 有時 “Channel Scan” 選項會設於 “Settings”,“Tools”,“Broadcast”,“Channels” 或“Options” 的選項內。
- 選擇 “Channel Scan”後,某些電視將彈出“Antenna”或“Cable”選項。選擇“Antenna”,然後按“OK”。您的電視將開始掃描。頻道掃描可能需要10分鐘。
- 掃描完成後,電視將顯示可用的頻道數量或將您帶回廣播。
- 仍然找不到您喜歡的頻道?嘗試再掃描一次,您可能需要將天線移到其他地方以獲得更好的接收效果
信號強度於不同地區而有所不同。於某些地區,您可能需要花更多時間才能找到信號﹐例如移動天線到不同位置並重新掃描﹐ 或可以考慮嘗試不同天線。 不同的天線可能有不同的掃描結果,但並不表示昂貴的一定更好,有時廉價的也能達到更佳效果。KTSF的信號從兩個發射塔發放。 一個來自南灣Mt. Allison,建議您使用環形或長方形天線接收信號。 另一個來自馬林縣Mt. Tamalpais山,建議您使用兔耳天線接收信號。
*本頁最下方提供「如何掃描電視」的視頻供參考*
KTSF has a NEW over-the-air signal. Scan your TV NOW, look for 26.11
KTSF programming is now on 3 different channels – 26.1, 26.2 and 26.11. Signals are from 3 different transmitters in the Bay Area. Channel 26.1 is the signal from Mt. Allison in the South Bay. 26.2 is from Mt. Tamalpais in the North Bay. Our NEW channel – 26.11 is from Sutro Tower, which is located on the Twin Peak in San Francisco. With signals from 3 transmitters, we are now covering the whole Bay Area. Scan your TV now, find the best signal to watch KTSF.
How to scan my TV?
- Make sure your TV is connected to an antenna.
- Press the “Menu” button on your remote control. (Some remote may have a “Setup” button instead of “Menu”)
- Find and select the “Channel Scan” option in your TV’s menu. This option is sometimes labeled “Rescan,” “Find Channel,” “Auto Program” or “Auto-tuning.”
- Sometimes the “Channel Scan” option is under the “Settings,” “Tools”, “Broadcast”, “Channels,” or “Options” menu. On some TVs, you have to press the “Input” button and go to “Antenna.”
- Once you choose the “Channel Scan” option, some TV will pop up an option of “Antenna” or “Cable”. Choose “Antenna”, then press “OK”. Your TV will start scanning. Channel scanning can take up to 10 minutes.
- When scanning is complete, your TV will either display how many channels are available or drop you back into a broadcast.
- Still missing the channel(s) that you like? Try running another scan, you may need to move your antenna to different place for better reception.
Signal strength is different in different areas, for some areas, you may need to try harder to find the signal. Please move your antenna and re-scan again. Or consider trying another antenna. Different antennas perform differently, but it does not mean expensive one is better, sometimes cheap one works perfectly fine. KTSF’s signal is transmitting from 2 transmitters. One from Mt. Allison in South Bay, you are suggested to use loop or rectangular antennas to receive the signal. Another one is from Mt. Tamalpais in Marin County, you are suggested to use rabbit ears antennas to receive the signal.
*There is a video on how to scan a TV at the bottom of this page*
如何掃描電視 (粵語視頻)
如何掃描電視 (國語視頻)
How to scan TV (Video)